Products

Product Resources

 

Speak with an Emulex Representative

 

Americas
info@remove-this.emulex.com
800-368-5393 or +1714-885-3450

EMEA
europe@remove-this.emulex.com
+44 1189-772929

Repair and Service

 

Americas
repair@remove-this.emulex.com
800-752-9068 or +1 714-885-3413
FAX: +1 714-885-3787

 

EMEA
services.europe@remove-this.emulex.com
+44 1189-772929

 

Technical Service

Connect with Emulex

Controller

  • BladeEngine® 3

Standards

  • RFC 3720 iSCSI, RFC 4171 iSNS, RFC 4544 iSCSI MIB, RFC 4545 IP Storage User Identity
  • PCI Express base spec 2.0
  • PCI Bus Power Management Interface, rev. 1.2
  • Advanced Error Reporting (AER)
  • IEEE 802.3ae (10GBASE Ethernet ports)
  • IEEE 802.1q (Virtual LANs)
  • IEEE 802.3ad (Link Aggregation)
  • IEEE 802.3x (Flow Control)
  • IEEE 802.1p (Quality/Class of Service)
  • IEEE 802.1Qaz (Enhanced Transmission Selection)
  • IEEE 802.1Qaz (Data Center Bridging eXchange)
  • IEEE 802.1Qbb (Priority-based Flow Control)
  • IEEE 802.1ab (Link Layer Discovery Protocol)
  • PHP hot plug-hot swap

Architecture

  • Dual-port, 10Gb/s Ethernet Link speed
  • PCIe Express 2.0 (x8, 5GT/s), MSI-X support
  • Integrated data buffer and code space memory

Ethernet Features

  • IPv4/IPv6 TCP, UDP checksum offload; Large Send Offload (LSO); Large Receive Offload; Receive Side Scaling (RSS); TCP Segmentation Offload (TSO); IPv4 TCP Chimney Offload
  • VLAN insertion and extraction
  • Jumbo frames up to 9000 Bytes
  • Preboot eXecution Environment (PXE) 2.0
  • Interrupt coalescing
  • Load balancing and failover support including adapter fault tolerance (AFT), adaptive load balancing (ALB), teaming support and IEEE 802.3ad

iSCSI Features

  • Target discovery methods
  • Authentication modes
  • INT 13 Boot

Comprehensive OS Support

Hardware Environments

  • x86, x64 processor family

Interconnect

  • Copper Direct Attach
    • SFP+ Direct Attach Twin-Ax Copper interface
    • Standards compliant passive copper cables up to 5m, active copper cables up to 10m
  • Optical
    • Optics: 10GBASE-SR short wave lasers with LC type connector

Physical Dimensions

  • Low profile with standard bracket (low-profile bracket available)

Environmental Requirements

  • Operating temperature: 0° to 55° C (32° to 131° F)
  • Storage temperature: -40° to 70° C (-40° to 158° F)
  • Relative humidity: 5% to 95% non-condensing

Agency Approvals

  • Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1
  • UL recognized to UL 60950-1 2nd edition
  • CUR recognized to CSA22.2, No. 60950-1-03
  • Baurt-certified to EN60950-1 2nd edition
  • FCC Rules, Part 15, Class A
  • ICES-003, Class A
  • EMC Directive 2004/108/EEC (CE Mark)
    • EN55022:2010, Class A
    • EN55024:2010
  • Australian EMC Framework (C-Tick Mark)
    • AS/NZS CISPR22, Class A
  • VCCI (Japan), Class A
  • KCC (Korea), Class A
  • BSMI (Taiwan), Class A
  • EU RoHS Compliant (Directive 2002/95/EC)
  • China RoHS Compliant

Ordering Information

  • OCe11102-IM
    • Dual-port, 10GBASE-SR (short reach optical)
  • OCe11102-IX
    • Dual-port, 10GBASE-CR (direct attach copper)
  • OC-Storage-01A
    • FCoE/iSCSI enablement - 1 license
  • OCe10100-OPT
    • Optical 10GBASE-SR SFP+ transceiver kit. (2 transceivers per kit)