Agency Approvals

• UL recognized to UL 60950-1
• CUR recognized to CSA22.2, No. 60950-1-07
• Bauart-certified to EN60950-1
• ICES-003, Class A
• EMC Directive 2004/108/EEC (CE Mark)
• EN55022: 2006 +A1, Class A
• Australian EMC Framework (C-Tick Mark)
• AS/NZS CISPR22, Class A
• EU RoHS Compliant (Directive 2002/95/EC)
• China RoHS Compliant
• cURus
• CE marking
• Australian C-Tick logo Emulex supplier code N17390
• Korean KCC Class A
• Taiwan BSMI Class A
• EMC: Emissions
  • Australia: AS/NZSCISPR 22:2009
  • Canada: ICES-003 Class A
  • EU: 2004/108/EC (EMC Directive)
  • EN55022: 2006 +A1, (CISPR 22, 2005 +A1, +A2)
  • Japan: VCCI 2010-04
  • Taiwan-BSMI
  • US: FCC/47CFR Class A
  • Korea: KCC Class A
• EMC: Immunity
  • EU: 2004/108/EC (EMC Directive)
  • EN55024: 1998+A1+A2
  • EC/EN61000-4-2 (ESD)
  • IEC/EN61000-4-3 (Radiated Immunity)
  • IEC/EN61000-4-4 (Electrical Fast-Transient Burst Immunity)
  • IEC/EN61000-4-5 (Surge Immunity)
  • IEC/EN61000-4-6 (Conducted Immunity)
  • IEC/EN61000-4-11 (Voltage dips)
  • IEC/EN61000-4-11 (Voltage interruptions)

Fiber Channel Standards

• ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA,
• FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4,
• SBC-3, FC-SP, FC-HBA and SMI-S v1.1
• PCI Express base spec 2.0
• PCI Express card electromechanical spec 2.0
• Fibre Channel class 2 and 3
• PHP hot plug-hot swap

Fibre Channel Architecture

• Dual-channel
• 8G, 4G or 2G FC Link speeds automatically detected
• Integrated data buffer and code space memory

Ethernet Features

• IPv4/IPv6 TCP, UDP checksum offload; Large Send Offload (LSO); Receive Side Scaling (RSS); IPV4 TCP Chimney Offload
• VLAN insertion and extraction
• Jumbo frames up to 9000 Bytes
• Interrupt coalescing
• HP Auto Port Aggregation (APA) NIC teaming for HP-UX

Ethernet Architecture

• Dual-channel, 10Gb/s Ethernet link speed
• PCIe Express 2.0 (x8, 5GT/s), MSI-X support

Cables

Direct Attach Copper (DAC) cables must be ordered separately- see your Ethernet switch vendor. 1Gb (1000BaseT) uses RJ45 Cat 6 or better, twisted pair copper cables.

HP recommended fibre optic cable for use with 8GFC or 10GbE Optical:

• HP 2m SW LC/SC FC cable kit (221691-B21)
• HP 5m SW LC/SC FC cable kit (221691-B22)
• HP 15m SW LC/SC FC cable kit (221691-B23)
• HP 2m SW LC/LC FC cable kit (221692-B21)
• HP 5m SW LC/LC FC cable kit (221692-B22)
• HP 15m SW LC/LC FC cable kit (221692-B23)
• HP 30m LC-LC multi-mode OM2 fiber optic cable (221692-B26)
• HP 50m LC-LC multi-mode OM2 fiber optic cable (221692-B27)
• HP .5m LC-LC multi-mode OM3 fiber optic cable (AJ833A)
• HP 1m LC-LC multi-mode OM3 fiber optic cable (AJ834A)
• HP 5m LC-LC multi-mode OM3 fiber optic cable (AJ836A)
• HP 15m LC-LC multi-mode OM3 fiber optic cable (AJ837A)
• HP 30m LC-LC multi-mode OM3 fiber optic cable (AJ838A)
• HP 50m LC-LC multi-mode OM3 fiber optic cable (AJ839A)

NOTE: Fiber transceivers and cables must be purchased separately for fiber-optic environments.

SFP+ Port Options

• Copper (SFP+ Direct Attached Twin-Ax Copper interface)
• Optical Connectivity
• 1000Base-T
• Integrated data buffer and code space memory

Physical Dimensions

• PCI full-height, half-length form factor card
• 111.15mm x 167.64mm (4.376” x 6.600”)
• Standard bracket

Power & Environmental Requirements

• Volts: +3.3, +12
• Operating temperature: 0° to 55°C (32° to 131°F)
• Storage temperature: -40° to 70°C (-40° to 158°F)
• Relative humidity: 5% to 95% non-condensing
• 23 degree C wet bulb

OS Support

• HP-UX 11iv3

Safety

• UL/CSA Recognized to UL 60950-1:2007 second edition, CSA 22.2 No 60950-1-07
• TUV Bauart Certified to EN 60950-1:2006 +A11
• CB Certificate and Report to IEC 60950-1:2005

Hardware Environments

• HP Integrity rx2800 i2, HP Integrity Superdome 2