Solution Implementer’s Series

Deployment Guide: Universal Multi-Channel for Emulex OneConnect OCe11102 10 Gigabit Ethernet Adapters How to configure Universal Multi-Channel for Emulex OneConnect OCe11102
Deploying 8G Fibre Channel and Virtual Fabric with IBM BladeCenter and VMware vSphere 4.1 Create robust, highly available VMware ESXi 4.1 environments with best-of-breed Virtual Fabric and Fibre Channel storage networking and IBM BladeCenter HX5 blade servers
Deploying 8Gb Fibre Channel with IBM System x Servers and VMware vSphere Create robust, highly available VMware ESX 4.1 environments with best-of-breed Fibre Channel storage networking and System x servers
Using Emulex 10Gb Virtual Fabric Adapters for IBM BladeCenter for iSCSI with VMware vSphere 4.1 How to deploy and optimize SCSI storage using Emulex 10Gb Virtual Fabric Adapters for IBM BladeCenter with VMware vSphere 4.1
Deploying OneConnect™ 10Gb Ethernet Adapters for iSCSI with VMware vSphere 4.1 Create robust, highly available VMware 4.1 environments with best-of-breed 10GbE iSCSI storage networking
Using OneConnect™ 10Gb Ethernet Adapters with VMware vSphere 4.1 Optimize and manage VMware deployments with OneConnect 10GbE adapters and OneCommand Manager

Application Notes

How to configure Emulex Virtual Fabric Adapters in vNIC mode for VMware ESX 4.1 A step-by-step process to configure and deploy the Emulex Virtual Fabric Adapter in vNIC mode with VMware ESX 4.1
How to install Emulex Fibre Channel drivers for VMware ESXi 4.1 using vCLI The application note will show a step-by-step process to install Emulex Fibre Channel drivers using vCLI with VMware ESXi 4.1. What is vCLI? vCLI refers to VMware Command Line Interface remote tool to communicate to VMware ESXi 4.1 and 4.1 U1 hosts.
Error Message Resolution: OneCommand Manager for VMware vCenter Plug-in v1.1 reports ""User does not have enough privileges to register an extension"" After installing the Emulex OneCommand Manager for VMware vCenter v1.1, you need to register the plug-in. When you try to do this, you get an error message that says ""User does not have enough privileges to register an extension.""