 | ||
|
Partners |
||
 |
 |
|
 | ||
Licensing Certifications 
|
||
 |
 |
 |
FC Port Driver
Driver Version 2.40a2
Qualification:
The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
FC Port 2.40a2 has been qualified with the Universal WHQL program, which does not support cluster qualifications.
SP1 Boot Failure with FC Port 2.22a8 Windows Server 2003 will not boot after an installation of SP1 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
| Driver kit - Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17 (14 MB exe file) |
 |
| Quick Install - Installing the driver using AutoPilot Installer (496 KB) | 
|
| Manual - Installation, Configuration and Troubleshooting (2.58 MB) |
|
 |
 |
 |
 |
 |