Standards

• ANSI Fibre Channel: FC-BB-5 (draft), FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FC-FLA, FC-SP, FC-PLDA, FC-TAPE and FCP-2
• PCI Express base spec 1.1
• PCI Express card electromechanical spec 1.1
• Fibre Channel class 3
• PHP hot plug-hot swap
• EEE 802.3-2005 10Gb/s Ethernet, 802.1Q, 802.1P, 802.3ad (via NIC drivers), 802.3X flow control
• Enhanced Ethernet (draft): Lossless Ethernet MAC using Priority Flow Control, Automatic link configuration using Data Center Bridging Capabilities eXchange Protocol

Architecture

• Single-channel (LP21000) 
• Integrated data buffer and code space memory

Comprehensive OS Support

• Windows Server 2008, Windows Server 2003, Suse Linux, Red Hat Linux, Solaris

Hardware Environments

• x86, x64 processor family

Physical Media

• Copper
  • SFP+ direct-attached 10Gb/s Copper: 1, 3 or 5 meters
• Optical
  • Data rates: auto-detected
  • Optics: 10GBASE-SR short wave lasers with LC type connector
  • Optical Cable:

Physical Dimensions

• Standard form factor card
• 111.15mm x 231.14mm (4.376" x 9")
• Standard bracket

Power and Environmental Requirements

• Volts: +3.3
• Operating temperature: 0° to 55°C (32° to 131°F)
• Airflow required: 150 lf/m
• Storage temperature: -40° to 70°C (-40° to 158°F)
• Relative humidity: 5% to 95% non-condensing

Agency Approvals

• Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1
• UL recognized to UL 60950-1
• CUR recognized to CSA22.2, No. 60950-1-03
• TUV certified to EN60950-1
• FCC rules, Part 15, Class A
• ICES-003, Class A
• EMC Directive 2004/108/EEC (CE Mark)
  • EN55022, Class A
  • EN55024
• Australian EMC Framework (C-Tick Mark)
  • AS/NZS CISPR22, Class A
• VCCI, Class A
• MIC (Korea), Class A
• BSMI (Taiwan), Class A
• RoHS Compliant (Directive 2002/95/EC) for environmental requirements

Ordering Information

• LP21000-M-E
  • Single-channel, optical SFP+ Interface
• LP21000-C-E
  • Single-channel, copper SPF+ Interface
    (3M cable included)

Ethernet Controller Features

• Load balancing and failover support including adapter fault tolerance (AFT), switch fault tolerance (SFT), adaptive load balancing (ALB), teaming support and IEEE 802.3ad
• IEEE 802.3 2005* flow control support
• IPv6, IPv4 Tx/Rx IP, TCP, and UDP checksum offloading
• TCP segmentation/large send offload
• MSI-X supports multiple independent queues
• Interrupt moderation

Enhanced Ethernet Features

• Lossless Ethernet MAC using Priority Flow Control
• Automatic link configuration using Data Center Bridging Capabilities eXchange Protocol

Additional Features

• Emulex LightPulse technology features frame-level multiplexing and out-of-order frame reassembly for maximum link utilization.
• End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting ensure that data is safe from corruption.
• Detailed real-time event logging and tracing enables quick diagnosis of SAN problems. Universal Boot capability allows the appropriate boot environment to be automatically selected for any given OS.
• Strong authentication between host and fabric is based on the Fibre Channel Security Protocol (FC-SP) Diffie-Helmann Challenge Handshake Authentication Protocol (DHCHAP).

Management

• Emulex feature-rich management capabilities simplify and speed deployment and device management, while reducing administration costs and protecting IT investments.
• Centralized discovery, monitoring, reporting and management of both local and remote adapters from a secure remote client. With in-depth management capabilities including remote firmware and boot code upgrades, beaconing, statistics and advanced diagnostics. An extensive CLI is available for scripting.
• Simplified installation and configuration of drivers and management capabilities for multiple adapters on Windows servers. A single installation of drivers and applications eliminates multiple reboots and ensures that each component is installed correctly and the CNA is ready to use.
• Rapid deployment and migration of virtual machines with SAN-attached storage in a Microsoft Virtual Server and Hyper-V environment leveraging NPIV-based Virtual HBA technology.
• Emulex management capabilities are based on open management standards. SMI-S and common HBA API support enable seamless upward integration into enterprise storage and server management solutions.