Téléchargements

 

Speak with an Emulex Representative

 

Americas
info@remove-this.emulex.com
800-368-5393 or +1714-885-3450

EMEA
europe@remove-this.emulex.com
+44 1189-772929

Repair and Service

 

Americas
repair@remove-this.emulex.com
800-752-9068 or +1 714-885-3413
FAX: +1 714-885-3787

 

EMEA
services.europe@remove-this.emulex.com
+44 1189-772929

 

Technical Service

 

tech.support@remove-this.emulex.com
800-854-7112 or +1714-885-3402

Connect with Emulex

Hardware Manuals

  • Installation Manual
  • Troubleshooting Manual

Firmware

The CNA supports the combination of FC firmware version 1.00x1 and CEE firmware version 0.5a5.

  • FC Firmware Version 1.00x1
  • CEE Firmware Version 0.5a5
  • Firmware Update Manual

Boot Code

Boot Code works with the existing BIOS on supported systems and allows the system to boot from a connected Fibre Channel drive.

  • x86 BootBIOS Version 2.12a6
    Platform: Intel (32-bit)
  • Open Boot Version 3.10a3
    Platform: SPARC, PowerPC
  • Universal Boot Version 5.12a2
    Contains: x86 BootBIOS 2.12a6 and OpenBoot 3.10a3
  • Boot Code User Manual

Boot Agent for Ethernet Controller

The Boot Agent prepares the boot ROM of CNA for PXE 2.1 boot and configures Wake On LAN options. It can be uploaded to the flash on the CNA. The Boot Agent can be used to boot a diskless workstation with the supported operating systems, or it can be used to install and set up an operating system on a new computer.

  • Boot Agent Version: 2.0.0.1
    Platform: Ethernet
  • Boot Agent Update Manual