Controller

• BladeEngine 3

Standards

• ANSI INCITS T11 FC-BB-5 2.0, FC-PI-2, FC-GS-4, FC-TAPE, and FCP-3
• PCI Express base spec 2.0’ PCI Bus Power Management Interface, rev. 1.2, Advanced Error Reporting (AER)
• IEEE 802.3ae (10GBASE Ethernet Ports)
• IEEE 802.1q (Virtual LANs)
• IEEE 802.3ad (Link Aggregation)
• IEEE 802.3x (Flow Control)
• IEEE 802.1p (Quality/Class of Service)
• IEEE 802.1Qaz (Enhanced Transmission Selection)
• IEEE 802.1Qaz (Data Center Bridging Capabilities Exchange)
• IEEE 802.1Qbb (Priority-based Flow Control)
• IEEE 802.1ab (Link Layer Discovery Protocol)
• PHP hot plug-hot swap

Architecture

• Dual-channel, 10Gb/s Ethernet Link speed
• PCIe Express 2.0 (x8, 5GT/s), MSI-X support
• Integrated data buffer and code space memory

FCoE Features

• Common driver for CNAs and HBAs
• 64 N_Port ID Virtualization (NPIV) interfaces (total for adapter)
• Support for FIP and FCoE Ether Types
• Fabric Provided MAC Addressing (FPMA) support
• 1024 concurrent port logins (RPIs) per port
• 1024 active exchanges (XRIs) per port

iSCSI Features

• Target discovery methods
• Authentication mode
• INT 13 Boot

Ethernet Features

• IPv4/IPv6 TCP, UDP checksum offload; Large Send Offload(LSO); Large Receive Offload; TCP Segmentation Offload (TSO); Receive Side Scaling (RSS); IPv4 TCP Chimney Offload
• VLAN insertion and extraction
• Jumbo frames up to 9000 Bytes
• Preboot eXecution Environment (PXE) 2.0 network boot support
• TCP Segmentation Offload (TSO)
• Interrupt coalescing
• Load balancing and failover support including adapter fault tolerance (AFT), switch fault tolerance (SFT), adaptive load balancing (ALB), teaming support and IEEE 802.3ad

Comprehensive OS Support

• Windows Server
• VMware ESX
• Red Hat Enterprise Linux Server
• Novell SUSE® Linux Enterprise Server

Hardware Environments

• x86, x64 servers

Server Support

• ProLiant G6 servers: DL160, DL165, SL2x170z, DL170, DL180, DL320, DL360, DL380, DL385, DL585, ML350, DL/ML370
• ProLiant G7 servers: DL165, SL165z, DL360, DL380, DL385, DL580, DL585, DL980

Interconnect

• Copper
• SFP+ Direct Attached Twin-Ax Copper interface
• Standards compliant passive and active copper cables supported up to 5m
• Optical
• Optics: 10GBASE-SR short wave lasers with LC type connector supported up to 100m

Physical Dimensions

• Low profile with standard bracket (low-profile bracket available)

Environmental Requirements

• Operating temperature: 0° to 55° C (32° to 131° F)
• Storage temperature: -40° to 70° C (-40° to 158° F)
• Relative humidity: 5% to 95% non-condensing

Agency Approvals

• Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1
• UL recognized to UL 60950-1 2nd edition
• CUR recognized to CSA22.2, No. 60950-1-07
• Bauart-certified to EN60950-1 2nd edition
• FCC Rules, Part 15, Class A
• ICES-003, Class A
• EMC Directive 2004/108/EEC (CE Mark)
  • EN55022, Class A
  • EN55024
• Australian EMC Framework (C-Tick Mark)
  • AS/NZS CISPR22, Class A
• VCCI (Japan), Class A
• KCC (Korea), Class A
• BSMI (Taiwan), Class A
• EU RoHS Compliant (Directive 2002/95/EC)
• China RoHS Compliant

HP Part Numbers

• HP CN1100E Dual Port Converged Network Adapter for ProLiant servers: BK835A